DISCOVERY TILE GLUE
USAGE INSTRUCTION:
  1. Surfaces to be coated must be strong and clean. It must be free of materials like paint, dust, dirt and oil which prevent excellent adhesion to the application surface.
  2. The ruined areas must be repaired for leveling the surface before application.
  3. Ceramic Adhesive Mortar in a powder form weighed 25kg.(1 bag) is mixed slowly with 7-7.5 liters of clean water by using a low cycled mixer or trowel until no cake remains.
  4. The surface must be saturated with water before application by wetting with clean water.
 



 


It is waited about 10 minutes for maturating of mortar, it must be remixed before using.
APPLICATION AREAS:
It has excellent adhesion properties for all types of concrete, plasters, and mosaic renderings, and alum coated surfaces, for interior and exterior places, on horizontal and vertical surfaces, in dry and wetted volumes like bathroom, kitchen, toilet, terrace, swimming pool, water tank. whenever it is used appropriate to usage instructions. it has very high adhesion strength. For any help please call our company
The prepared mortar must be consumed within 2-3 hours. The mortar expired this time must never be reprepared even by adding water or dry mixture material on it for using again.
ADVANTAGES:
  • It is applied in both interior and exterior places.
  • It is used safely in both horizontal and vertical places.
  • It is prepared easily by saving material and time
  • It is more strong and dependable comparing to applications made by traditional mortar.
COVERAGE:
  1. Thin Bed Fixing Approximately 2Kg.Per Sqm
  2. Solid Bed Fixing Approximately 3Kg.Per Sqm
CAUTION:
Pay attention not to breathe in during usage, since it is based on cement and add no additives (lime, cement, plaster etc.) other than water during preparation of mortar.
NILLI TILE GLUE
USAGE INSTRUCTION:
  1. Surfaces to be coated must be strong and clean. It must be free of materials like paint, dust, dirt and oil which prevent excellent adhesion to the application surface.
  2. The ruined areas must be repaired for leveling the surface before application.
  3. Ceramic Adhesive Mortar in a powder form weighed 25kg.(1 bag) is mixed slowly with 7-7.5 liters of clean water by using a low cycled mixer or trowel until no cake remains.
  4. The surface must be saturated with water before application by wetting with clean water.
It is waited about 10 minutes for maturating of mortar, it must be remixed before using.
APPLICATION AREAS:
It has excellent adhesion properties for all types of concrete, plasters, and mosaic renderings, and alum coated surfaces, for interior and exterior places, on horizontal and vertical surfaces, in dry and wetted volumes like bathroom, kitchen, toilet, terrace, swimming pool, water tank. whenever it is used appropriate to usage instructions. it has very high adhesion strength. For any help please call our company
The prepared mortar must be consumed within 2-3 hours. The mortar expired this time must never be reprepared even by adding water or dry mixture material on it for using again.
ADVANTAGES:
  • It is applied in both interior and exterior places.
  • It is used safely in both horizontal and vertical places.
  • It is prepared easily by saving material and time
  • It is more strong and dependable comparing to applications made by traditional mortar.
EXTRA SPECIFICATION
When the temperature in the aim place is the expression by him what except 0 a centigrade to 25 centigrade under the zero should follow the next steps:
  1. He clears the ceramics from back a 100% the and he should be devoid from any impurities that hinderst the subject.
  2. The aim place clear the expression in him a 100% and he should be devoid from any impurities that hinderst the subject
  3. The Subject leaving ought to drys neck hundred hour after the synthesis to the material drought guarantee a 100%
COVERAGE :
  1. Thin Bed Fixing Approximately 2Kg.Per Sqm
  2. Solid Bed Fixing Approximately 3Kg.Per Sqm
CAUTION :
Pay attention not a breathe in during usage, since it's based on cement, and add no additives (lime, cement, gabes etc.) Other than water during preparation of mortar.
NILLI MARBLE GLUE
N.M.G is a dry pre-mixed waterproof Cement-based tile glue for Ceramic tiles fixing or Marbel & heavy Stone.
ADVANTAGES:
- Could be applied in both interior & exterior places.
- Could be used saftly in both Horizontal & Vertical places.
- It is more strong and dependable compairing to application dono by ordinary mortar.
- Could be used on wooden surfaces.
TECHNICAL DATA:
Description : N.M.G Consists of protland Cement, processed sand and chemical additives Binder & Portland Cement.
Aggregate size : 0-0.6mm.
Colour : Gray and White.
Mixing ratio : 7-7.5 ltr of clean water for every 25kg/bag.
Coverage : 10m2 per bag at 3mm thick.
Compressive Strength : 25N/mm2 @ 25 days.
Density : wet 1.75kg/ltr dry 1.7kg/ltr.
Flexural strength : 4N/mm2 @ 28days
Shelf Time : One year from date of product/Store under dry conditions
Pot life : 30 minuts.
Curing : 36 hours by potable water.
Specficaton-BS : 5980 Type L.Class A:A & 4551 ANSI A1181, DIN18156
NOTE : N.M.G is used specialy for swimming pool cladding, water resistant anti-bacterial and anti-fungal combination cement.
 
© 2010 Discovery Paints & Adhesive. All Rights Reserved. Links